Central Hydraulics 58047 Owner'S Manual & Safety Instructions Download Page 5

Specific Safety Instructions

1. 

The warnings and precautions 
discussed in this manual cannot 
cover all possible conditions and 
situations that may occur.  It must 
be understood by the operator that 
common sense and caution are 
factors which cannot be built into this 
product, but must be supplied by the 
operator.

2. 

Do not adjust the factory set Safety 
Valve.  This valve should only be set 
or reset by a qualified technician.

3. 

This air hydraulic Foot Pump must 
be secured tightly to a stable surface 
to prevent dynamic pressure from 
moving it around during use. Make 
sure there is no tripping hazard.

4. 

Follow manufacturer’s instructions for 
compressor and attachments used.

5. 

Hydraulics must be opened 
and serviced only by a qualified 
technician.

6. 

Only use with hose (not included) and 
other accessories rated to handle 
the forces exerted by this tool during 
operation.  Other accessories not 
designed for the forces generated 
may break and forcefully launch 
pieces.

7. 

Never press the end of the hose (not 
included) against your skin or the 
skin of another person or animal. It is 
possible to inject fluids into your skin 
if using this tool inappropriately.

8. 

Attach all accessories properly to the 
tool before connecting the air supply.  
A loose accessory may detach or 
break during operation.

9. 

Obey the manual for the air 
compressor used to power this tool.

10.  Install in-line shutoff valve to allow 

control over the air supply in an 
emergency, even if a hose is 
ruptured.

Vibration Precautions

This tool vibrates during use.  

Repeated or long-term exposure to 
vibration may cause temporary or 
permanent physical injury, particularly to 
the hands, arms and shoulders.  To reduce 
the risk of vibration-related injury:

1. 

Anyone using vibrating tools regularly 
or for an extended period should 
first be examined by a doctor and 
then have regular medical check-
ups to ensure medical problems are 
not being caused or worsened from 
use.  Pregnant women or people 
who have impaired blood circulation 
to the hand, past hand injuries, 
nervous system disorders, diabetes, 
or Raynaud’s Disease should not 
use this tool.  If you feel any medical 
or physical symptoms related to 
vibration (such as tingling, numbness, 
and white or blue fingers), seek 
medical advice as soon as possible.

2. 

Do not smoke during use.  Nicotine 
reduces the blood supply to the 
hands and fingers, increasing the risk 
of vibration-related injury.

3. 

Wear suitable gloves to reduce the 
vibration effects on the user.

4. 

Use tools with the lowest vibration 
when there is a choice between 
different processes.

5. 

Include vibration-free periods each 
day of work.

Page 5

Item 58047

For technical questions, please call 1-888-866-5797.

Summary of Contents for 58047

















Reviews: