15
15
SCENIC W504 User Manual
Eng
Fixture resets but does
not respond correctly to
controller (DMX mode
operation)
Conflict between tracking
and vector control
Eliminate scene cross-fade on
controller
Data link not terminated
Insert termination plug in output
of last fixture**
Defective fixture on 2 devices
transmitting on link
Bypass fixtures one at a time
until normal operation is
regained: unplug both connec-
tors and connect them directly
together
* To contact CentoLight service, see “9 - Warranty And Service” on page 16 or visit
** For instruction on how to install a DMX terminator, see “5.4. DMX Terminator” on page 11.
8 - s
PeCifiCaTion
Light Source
4 x 50W LED
Color System
2x Warm White @ 3200°K + 2x Pure White @ 5600°K
LED Control
Flicker-free
Optical System
25° lens
Luminance
109000 Lux @ 1m; 27000 @ 2m (all LEDs combined)
Light Source Life-Cycle
> 50.000 h
Dimmer
0-100% linear dimming with Sinusoidal Smooth Subdivision
Technology
DMX Control Mode
DMX512 6CH/2CH with RDM
Operating Modes
Master/Slave, Sound Active, Manual
Strobe
0-20Hz
Cooling System
All-Direction Ventilating System with DSP control (fan is
stopped when LED board temperature is under 40°C; it runs
when it is over)
Fan Noise
0dB (temp under 40°C); 43.0 dBA @ 0.5m (temp. above 41°C);
46.1 dBA close to fixture
IP Rate
IP20
Working Temperature
Room Temperature between -20°C and 50°C (-4°F to 122°F)
Housing
Aluminum with fine sand wear-resistant spray paint
Operating Voltage
110V-240V / 50-60Hz
Power Consumption
220W max.
Fixture Size (LxD)
Min. Ø228 x 138.5 mm (Ø8.98 x 5.45 in); Max. - bracket includ-
ed - Ø282 x 253 mm (Ø11.10 x 9.96 in)
Fixture Weight
2,9 kg (6.39 lbs.)
Carton Size (LxHxD)
290 x 290 x 290 mm (11.42 x 11.42 x 11.42 in)
Carton Weight
3,7 kg (8.16 lbs.)
Note: Our products are subject to a process of continual further development. Therefore modifications to
the technical features remain subject to change without further notice.
