7
7
Clubwasher 360 User Manual
Eng
y
The unit can not be used near water; for example near a bathtub, a kitchen sink,
a swimming pool, etc.
3.3. Heat
y
Do not use in a confined space. Always install the product in a location with
adequate ventilation, at least 20in (50 cm) from adjacent surfaces. Be sure that
no ventilation slots on the product’s housing are blocked.
y
The apparatus should be located away from heat sources such as radiators,
stoves or other appliances that produce heat.
Don not use it when maximum ambient temperature is higher than 50°C. Work
temperature ranges from -20°C to 50°C (-4°F to 122°F).
3.4. Servicing
y
Do not implement any servicing other than those means described in the man-
ual. Refer all servicing to qualified service personnel only. The internal compo-
nents of the equipment must be purchased from the manufacturer. Only use
accessories/attachments or parts recommended by the manufacturer.
4 - i
nTroduCTion
The Clubwasher series by Centolight was created to offer indoor projectors for all
those architectural and live applications that require diffused lights (backdrops of
scenes, architectural structures, etc.) and with a rather wide projection angle (45°).
The Clubwasher 360 has a light source consisting of 36 LEDs 10W RGBW 4in1 ar-
ranged in 4 horizontal rows of 9 each.
The luminescence in Full-color @ 1m condition can reach 26000 Lux. The CRI is high-
er than 80 to guarantee an excellent color rendering in all uses. The dimmer control
includes 5 adjustment curves to adapt the fixture response to all the main uses; the
scanning frequency higher than 25kHz makes this light flicker-free, and it can be
used even during television shooting.
The internal temperature is controlled by sensors which, in case of heating above
80°C, reduces the luminescence and controls the fan speed, so as to cool the chips
and reduce the noise of the fans when cooling is not needed. The result is greater
reliability and lifespan of LEDs.
The structure of the fixture is made of plastic material with mechanical parts and
steel brackets that give strength and at the same time lightness and practicality.
