LCD display
:
6 1/2" large size back light LCD display.
Power button
:
Push this button to turn on the meter. Push and hold this button for 3
seconds to turn it off. The unit will automatically turn itself off after 30
minutes if there is no key operation. To disable the automatic power off
function, turn the meter off, push and keep holding “ ” button, then
push power button to turn on. The “ ” will disappear from the LCD to
confirm this operation.
Backlight ( Power ) button
:
Push this button to turn on and off the LCD backlight. The backlight will
be automatically off after 30 seconds to save battery power.
HOLD button
:
The user may hold the present reading and keep it on the LCD display
by pressing the button. To release the data held operation, user
may press the button again.
Max Min button
:
Push this button to set the meter working under MAX/MIN mode. By
pushing this button, the user may swap the LCD reading among
maximum, minimum and current reading. Push and hold this key for 3
seconds to exit MAX/MIN mode.
2
uw/cm selector button
:
2
To switch the measuring range to lower range with unit uw/cm
2
mw/cm selector button
:
2
To switch the measuring range to higher range with unit mw/cm
2. Name of Parts & Position:
1
2
3
4
5
6
7
8
Light Sensing Probe
:
This probe can be fixed on the meter parallel or perpendicular to
the LCD surface. Or it may be detached from the unit to fit the
measuring requirement.
Battery cabinet cover
:
When battery capacity segment is
less than one, the user should
replace the battery. The battery
cabinet cover can be opened with a
Philips screw driver and two AA type
batteries should be replaced.
/
/
9
