CENGAR
SAWS
are
hand
held
reciproca ng
saws
designed
to
cut
metals
and
plas cs
in
produc on
environments
and
can
be
used
in
Atex
zoned
areas
where
appropriate.
They
should
only
be
used
by
trained
operators
who
are
responsible
for
the
safety
of
themselves
and
others
in
the
vicinity.
Saw
blades
are
capable
of
causing
serious
injury
Think
safe
Act
safe
Be
safe
LUBRICATION
Use Cengar Green Oil with longer las ng coa ng proper es for best
results. Cengar Green Oil is specially prepared to:
‐
1
Emulsify the water generally found in compressed air lines.
2
Give perfect mist lubrica on.
3
Remain
fl
uid at the low working temperature of compressed air tools.
4
Contains corrosion and oxida on inhibitors.
Incorrect oils if used will soon “break down” forming a sludge which will
slow and eventually stop the ac on of the saw. See maintenance details.
INSTALLATION
OF
BLADES.
Before a emp ng to insert or change a blade, ensure that the air supply is
isolated by opera ng the isola on valve provided. Loosen the retaining
grub screws with the key provided, insert blade through nosepiece so that
the teeth are cu ng on the pull stroke.
Locate the back screw in the hole in the end of the blade, for a posi ve
drive, the front screw can then be ghtened to grip the blade
fi
rmly.
BLADES
Cengar “Sha erproof” Bi
‐
Metal blades are specially prepared for use with
Cengar saws, to withstand the high opera ng speeds, and give maximum
cu ng life.
Choose the teeth per inch to suit the characteris cs of the material being
cut.
Choose pitch to ensure that at least 3 or 4 teeth are cu ng at the same
me.
