2. Remove the existing Battery and replace with identical Battery as listed in the
“Specifications” chart on page 3 of this manual.
NOTE: Dispose of the used
Battery in accordance with all local ordinances.
Replace the Battery Compart-
ment Cover.
Caliper Head
Inside Measurement Prongs
On/Inch/MM/Fraction
Slide Lock LCD Readout
Thumb Wheel Depth Gauge
Outside Measurement Jaws Zero Button Battery Compartment
Figure 3
Off Button
1. BEFORE EACH USE, inspect the general condition of the tool. Check for any
condition that may affect its safe operation.
2. After use, wipe with soft, clean cloth and store inside, away from extreme hot, or
cold and where children do not have access.
3. Face should be wiped periodically with a clean, dry, lint-free cloth. Lubricate body
of Caliper with a few drops of clock oil. Acetone or alcohol should never be used.
4. Keep Battery Compartment clean, dry and free of corrosion.
5. Keep this Caliper dry at all times to prevent destroying the electronics.
SKU 98851
For technical questions, please call 1-800-444-3353.
Page 5
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE
OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED
TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR
EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY
CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK
AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACE-
MENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS
THERETO.
Cleaning and Maintenance
PLEASE READ THE FOLLOWING CAREFULLY
