i. The warnings, precautions, and
instructions discussed in this
instruction manual cannot cover all
possible conditions and situations
that may occur. It must be under-
stood by the operator that common
sense and caution are factors which
cannot be built into this product, but
must be supplied by the operator.
2. Service
Have your Digital Caliper serviced by a
qualified repair person.
This will ensure
the integrity of this tool is maintained.
SAVE THESE
INSTRUCTIONS.
Display Scales
Decimals, Fractions, &
Millimeters
Display Digits
LCD (Liquid Crystal Display)
Calipers Range
0” - 6”, Or 0mm - 150mm
Measuring Speed
1.5m/sec OR 60in/sec
Measuring
Positions
4-Way Measuring:
Outside
Inside
Depth
Step
Power Supply
One 1.5V DC LR44 Button
Cell Battery (Included)
Shut-Off
4 Minute (Automatic)
SPECIFICATIONS
UNPACKING
When unpacking, check to make
sure that the item is intact and undam-
aged. If any parts are missing or broken,
please call Harbor Freight Tools at the
number shown on the cover of this manual
as soon as possible.
SKU 98851
For technical questions, please call 1-800-444-3353.
Page 3
2. Slide apart the Jaws of the Calliper.
See
Figure 1.
List of contents
Part(s)
Description
Q’ty
1
6” Digital Calliper
1
1
Plastic Storage Case
1
OPERATING INSTRUCTIONS
Read the ENTIRE
IMPORTANT SAFETY
INFORMATION section at the
beginning of this manual
including all text under
subheadings therein before set
up or use of this product.
DO NOT
bump, or shock the Digital
Caliper when applying it to the workpiece.
Rough treatment may damage the highly
sensitive mechanism.
Measuring the Outside of an
Object
1.
Push the “ON” Button. To change the
setting from inches to fractions, or to
millimeters, press the “ON/Inch/Frac-
tion/MM” Button. Each time the But-
ton is pressed, the mode will change.
Figure 1
Inside
Measurement
On/Inch/MM/Fraction
LCD readout
Battery
Compartment
Zero Button
Outside Measurement
Off
!
!
