Page 9
SKU96959
for technical questions, please call 1-800-444-3353.
cleaning, maintenance, and lubrication
befOre each use,
1.
inspect the general condition of the tool. Check for
cracked or broken parts, and any other condition that may affect its safe
operation.
after use,
2.
clean external surfaces of the tool with clean, moist cloth. Do not
use solvents or chemicals to clean laser output window. This is a precise and
delicate instrument; handle with care.
please read the fOllOwing carefullY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY
DIAGrAm In THIS mAnuAL AS A rEFErEnCE TooL onLy. nEITHEr THE mAnuFACTurEr or
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT
HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR
DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE
UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER
ASSumES ALL rISk AnD LIAbILITy ArISInG ouT oF HIS or HEr rEPAIrS To THE orIGInAL
ProDuCT or rEPLACEmEnT PArTS THErETo, or ArISInG ouT oF HIS or HEr InSTALLATIon
OF REPLACEMENT PARTS THERETO.
Record
product’s serial number here:
note:
If product has no serial number, record month and year of purchase instead.
note:
Some parts are listed and shown for illustration purposes only, and are not
available individually as replacement parts.
maintenance and servicing
rotate the locking device (13) to the horizontal position
(Off) before performing any inspection, maintenance, or
cleaning procedures.
always make sure lasers are turned off before adjusting or
changing batteries.
damaged equipment can fail, causing serious personal
injury. do not use damaged equipment.
warning
REV 08b