background image

SKU 93233     

For technical questions please call 1-800-444-3353

   Page 12

4.

Then insert 16.2mm Spacer (13).

5.

Insert the other Inversion Lens (05) with the “5” marking toward the top.

6.

Press all parts into place using the Assembly Rod (16).

7.

Insert the Symmetric Lens Eyepiece (07).

8.

Remove the 21mm Spacer from the bottom of the Drawtube (02). Spacer (14)

is used only to position the other parts correctly in the Drawtube.

9.

Place your specimen to be examined on the Glass Slide (15), and place the

Glass Slide in the Microscope Base (03).

10. Place the Drawtube assembly on the Microscope Base, and focus using the

Eyepiece (07).

11. You will need a lot of light to see clearly. Turn the opening on the side of the

Microscope Base toward a strong source of light. The light will be reflected up
through the specimen by the mirror which is mounted in the base.

#7 the 35X microscope

Assemble the 35X microscope the same way as the 17X microscope, except:

In step 2, place the 9.8mm Spacer (11) in the Drawtube (02) instead of Spacer

(14).

In step 4, insert the  5mm Spacer (10) instead of Spacer (13).

the 35X microscope

the 17X microscope

Summary of Contents for 93233














Reviews: