manualshive.com logo in svg

CEN-TECH 62142, Owner'S Manual & Safety Instructions

Share
Download
CEN-TECH 62142 Owner'S Manual & Safety Instructions Download Page 9

Page 9

For technical questions, please call 1-888-866-5797.

Item 62142

Operating Instructions

Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the 

beginning of this document including all text under subheadings therein 

before set up or use of this product.

TO PREVENT SERIOUS INJURY AND DEATH: 

Exhaust gases are poisonous. Operate the vehicle in a well ventilated work area. 

Wear ANSI-approved safety goggles during use.

Connect Scan Tool

CAUTION:

  

Do not connect or disconnect 

the Scan Tool while the ignition 

is on or the engine is running.
Note:

  The Scan Tool is powered 

by the vehicle’s battery.
1.  Turn the engine and ignition 

OFF.

2.  Connect the Cable to the 16-cavity DLC.  

The DLC is normally located under 

the dashboard on the driver’s 

side.  (Refer to vehicle’s owner’s 

manual for location of DLC.)

Figure C:  DLC

 

3.  Turn the vehicle’s ignition 

ON

 

with the engine 

OFF

. 

Note:

  If 

Linking Error! 

message

 

displays:

•  Verify the ignition is 

ON

•  Verify the vehicle is OBD II compliant

4.  If the message does not go away, 

have the Scan Tool inspected 

by a qualified technician. 

Brought to You by www.snapwhole.com

Brought to You by www.snapwhole.com

Summary of Contents for 62142

















Reviews:

No comments

Brands by name

Popular brands

Load more brands