manualshive.com logo in svg

CEN-TECH 62142, Owner'S Manual & Safety Instructions

Share
Download
CEN-TECH 62142 Owner'S Manual & Safety Instructions Download Page 14

Page 14

For technical questions, please call 1-888-866-5797.

Item 62142

5) Vehicle Information

Note:

  Not all vehicles return the 

same data, results may vary from 

the examples given herein.
1.  From 

Diagnostic Menu

, select 

Vehicle Info.,

 then press 

ENTER.

Vehicle Info.

                                          1/4

►

Calibration ID

In-use Perform Track

 

  Cal. Verf. Number

Previous Menu

Figure T

2.  From 

Vehicle Info.,

 select, 

Calibration ID

 then press 

ENTER.

Calibration ID

                                          1/1

Cal ID:

 

  34714000

.

Figure U

3.  From 

Vehicle Info.,

 select, 

Cal. Verf. Number

 then press 

ENTER.

Cal. Verf. Number

                                          1/1

CVN1:

 

  9C 89 54 C5

Figure V

Note:

  For 

In-use Perform Track,

 have 

a qualified technician Interpret the data. 

Record Serial Number Here: 

 
Note:

 If product has no serial number, record month and year of purchase instead.

Note:

 Some parts are listed and shown for illustration purposes only, 

and are not available individually as replacement parts

Brought to You by www.snapwhole.com

Brought to You by www.snapwhole.com

Summary of Contents for 62142

















Reviews:

No comments

Brands by name

Popular brands

Load more brands