9
2.2) Drilling machine (
Ref. to Fig. 1):
1- TPM... Guard Nozzle:
stainless steel threaded centering device for attachment to the guard (2).
Alternative guard nozzle are available with diff erent diameters, to suit diff erent size hole (Ref.
to § 10.2).
2 - PRM-UN detachable guard:
stainless steel telescopic element, controlled by the return springs,
which provides protection for the auger. The lower end is threaded for attachment of the TPM
nozzle.
3 - Latch:
rotated through 90° to remove the PRM-UN guard for easy replacement of the auger.
4 - Return springs:
to assist the retraction of the auger from the sleeper on completion of the
drilling operation and to reduce operator eff ort.
5 - Depth adjusting gauge:
graduated scale on the fi xed guard to determine the desired hole
depth.Automatically stops the travel of the auger at the desired depth.
6 - Transport handle:
to comfortable transport the drilling machine and joining element to the
support
trolley.
7 - LED work lights ON/OFF Switch:
to activate or deactivate the illumination of the LED work
lights (9) on the handlebar (Ref. to § 3.2).
8
-
Motor ON/OFF/ON Switch (EMERGENCY):
is placed on the motor in an easily visible posi-
tion and can be rapidly activated in case of emergency (Ref. to
§ 3.1
).
9
-
High effi
ciency LED work lights:
enables effi
cient illumination of the drilling area (e.g. in
tunnels or outdoors at night).
10 - Control handgrip:
to control the drilling machine during operation (Ref. to
§ 3.3
).
11 - CB3662L rechargeable battery:
Li-Ion 36 V 6,2 Ah (LiHD Technology) (Ref. to
§ 4
).
12 - Handgrip:
left side.
13
-
OLED display:
switches on automatically when the machine is started and automatically
switches
off after a set time of non-operation (Ref. to
§ 3.5
).
14 - Capacitive touch button:
for menu selection (Ref. to
§ 3.5
).
15 - Electric Motor:
36 V Brushless.
16 - Emergency lever for quick auger release:
if necessary, this lever allows immediate release
of the auger from the machine, which can then be removed from the working area.
17 - Fixed guard:
stainless steel guard protecting the spindle, featuring a graduated depth gauge.
18 - MND spindle:
featuring an automatic quick lock mechanism suitable for augers with Ø 14
mm
shank.
19 - Motor start button
(Ref. to
§ 3.3
).
20 - Mechanical interlock
(Ref. to
§ 3.3
).
21 - Right signalling LED
(Ref. to
§ 3.4
).
22 - Left signalling LED
(Ref. to
§ 3.4
).
23 - Rainproof Cover:
silicone cover, only for
-RP drilling machine variants
.
ENGLISH