14
1.11.2 Inserting the Media into the Printhead
4
1
5
3
2
7
6
Figura 10 Inserting the media into the printhead
1. Turn lever (2) counterclockwise to lift the printhead.
2. Adjust the guide(s) (6) with the knob (7) in such a way that the media can pass between the two guides.
3. Guide label strip over the internal rewinder to the print unit.
4. Guide label strip through the label sensor (3) in such a way that it exits the print unit between the printhead and
the print roller.
5. Move guide(s) (6) against the edge(s) of the material by turning the knob (7).
1.11.3
Loading Material
4
4.1.2
Figure 10
