1. GENERAL CHARACTERISTICS
– Application range:
suitable for tightening and loosening operations using an impact
system, for railway and industrial applications.
– Capacity:
(max. bolt diameter) ....................................................... 33 mm (1.3 inches)
– Max. torque developed:
.............................................................2500 Nm (1844 ft.lbs)
– Dimensions:
...........................................................................refer to Fig. 16, page 71
– Weight:
(dry) ..................................................................................... 18,5 kg (40.7 lbs)
– Gear change:
.................................................................................manual, 3 positions
– Reduction gear:
.................................................................................................oil bath
–
recommended oil (190 ml): .......................SYNTHY TOOL MACHINE ISO 100/GX5 or
BEL-RAY SE-2 LUBRICANT ISO 100 or equivalents
– Impact unit:
– square drive (DIN 3121):........................................................................... 25,4 mm (1")
– lubrication grease:..........................................KLUBER STABURAGS N12MF (100 gr.)
– Combustion engine:
– type: ........................................................................2 stroke, single-cylinder, air cooled
– displacement: .........................................................................................................55 cc
– Power: ......................................................................................................3 kW (4,1 HP)
– n° of revs idling: ................................................................. min. 2800 - max.11500 rpm
– n° of revs under load: ......................................................................................7000 rpm
– carburettor:....................................................................................................membrane
– spark plug: .............................................................type ACTIVE RAX80 or equivalents
– ignition:..................................................................................................................digital
– fuel: ...........................................................................................petrol mixture (see § 4)
– tank capacity: ........................................................................... 1,2 liters (0.3 USA Gal.)
– clutch:.................................................................centrifugal with automatic intervention
– start: .........................................................................by rope pull with automatic rewind
–
Acoustic noise (Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u)
– The weighted continuous acoustic pressure level equivalent
A at the work place L
pA
is equal to ................................................................96,2 dB (A)
– The maximum value of the weighted acoustic displacement
pressure C at the work place L
pCPeak
is equal to .........................................123,9 dB (C)
– The acoustic power level emitted by the machine
L
WA
is equal to .............................................................................................108,9 dB (A)
–
Risks due to vibration (Directive 2006/42/EC, annexe 1, point 2.2.1.1)
Tests carried out in compliance with the indications contained in UNI ENV 25349 and
UNI EN 28662 part 1
st
Standards, and under operating conditions much more severe
than those normally found, certify that
the weighted root mean square in frequency of
the acceleration the upper limbs are exposed is 8,68 m/sec
2
max.
ENGLISH
72
3
274 (10.8)
640 (25.2)
431 (16.9)
Serial Number
Numéro de série
Seriennummer
Número de serie
Numero di Matricola
