26
When the work has been completed, store the drill by proceeding as follows:
12.1)
Depressurise the tank of the
SR5000
coolant unit (see § 4), close the tap (02) on the tube
from the tank and disconnect the quick-coupling (03).
12.2)
Carefully clean the drill, particularly in the spindle area, removing machining waste (swarf,
etc.) and any deposits of lubricating coolant.
12.3)
Fully withdraw the spindle.
12.4)
Place the drill and the
SR5000
cooling unit in a sealed place free from dust, moisture and
the risk of accidental impact.
For better protection
Cembre
recommends the use of the
VAL P24
plastic carrying case or
VAL P24-CS (
variant with folding handle and wheels, see Fig. 25
)
designed for this purpose
(see § 3.2). The DBG-F2 moving arm device allows the drill to be housed and locked in the case.
Suitable housings are also provided in the plastic case
for containing the most commonly used
accessories.
12. STORING THE DRILL
FIG. 25 VAL P24-CS PLASTIC CARRYING CASE
RAIL DRILL
ACCESSORIES
PLASTIC CASE
ACCESSORIES