3
HYDRAULIC PRESSHEAD
TYPE ECW-H3D
1. GENERAL CHARACTERISTICS
– Application range:
the head is suitable for compression of electrical connectors on conductors
from 10 ÷ 630 mm
2
(4 AWG - 1250 MCM).
An adapter AU230-130D is available as optional extra enabling the head to utilise the semi-circular
slotted dies which are common to most 130 kN tool. Also available is a series of dies for the compres-
sion of DIN electrical connectors, and a die for cutting copper, aluminium, aldrey, aluminium-steel
and steel conductors.
– Crimping force:
................................................................................................................230 kN
(25.8 sh ton)
– Max operating pressure:
.............................................................................................700 bar
(10,000 psi)
– Oil necessary
(displacement)
:
....................................................................................91 cm
3
(5.5 cu. in)
– Dimensions:
length .......................................................................................................290 mm (12.4 in.)
width .........................................................................................................120 mm (4.7 in.)
– Weight:
................................................................................................................................5,5 kg
(12.1 lbs)
2. INSTRUCTIONS FOR USE
2.1) Setting
The head is equipped with a "self-lock" quick male coupler suitable for connection to a hydraulic,
pneumatic or electrical pump from the
Cembre
range.
2.2) Die assembly
(Ref. to Fig. 1)
a) Dedicated dies
– Select the appropriate die set for the connector to be crimped.
– Extract the die retaining pin (09) from the head.
– Insert the lower die (26b) and align the groove (30) in the die, with the guide pins (15) in the head.
– Insert the upper die (26a) into the head.
– Insert the die retaining pin (09) in the head and through the upper die. Ensure the spring loaded
pin (10) is fully released.
b) Semi-circular dies
– Select the appropriate die set for the connector to be crimped.
– Extract the die retaining pin (09) from the head.
– Insert the lower half of adapter AU230-130D (31b) and align the groove (30) in the adapter, with
the guide pins (15) in the head.
– Insert the upper half of the adapter AU230-130D (31a) into the head.
– Insert the die retaining pin (09) into the head and through the adapter. Ensure the spring loaded
pin (10) is fully released.
ENGLISH
