background image

3

BATTERY OPERATED HYDRAULIC TOOL

TYPE BTEPE2.DET10

The hydraulic tool is powered by 

14.4 V Li-Ion 

battery. 

A  balanced tool  for optimum control; quiet in operation with very little vibration; lightweight 

construction enables the operator to hold the tool in one hand.

The residual battery capacity level is automatically displayed after every cycle.

The system consists of:

–  Battey pump unit and insulated hose 

  assembly type BTP2-Z-IS

–  GO / NO GO gauge type CAL 135.145

–  Battery (qty 2)

–  Battery charger

–  Shoulder strap

–  Canvas bag type “009”

–  Hydraulic head type RHTEPE-S16

–  Plunger type OG 10.5C (qty 2)  

–  Adapter M9M8

1.  GENERAL CHARACTERISTICS

 

Application range:

 suitable for installing AR66LDA rail web electrical connection 

  system into rail web thickness 19-20 mm (e.j. BS113A, BS95RBH) and hole diameter  

  13,5 mm.

 

Installation force:

 ...................................................................... 55 kN

 

Rated operating pressure:

 ....................................................... 600 bar (8,700 psi)

 

Dimensions pump body:

 length ............................................... 230 mm  

        

width ................................................. 94 mm

          

height ............................................... 302 mm

          

insulated hose length ....................... 900 mm

 

Weight:

 (with battery) ................................................................. 4,7 kg

 

Motor:

 ......................................................................................... 14.4 V DC

 

Battery type:

 .............................................................................. 14.4 V – 3.0 Ah Li-Ion

 

Recommended oil:

 ................................

AGIP ITE 360

  

or 

      

ESSO TRANSFORMER P60

  

or equivalent

 

Safety:

 the tool is provided with a maximum pressure valve.

2.  INSTRUCTIONS FOR USE
2.1) Setting 

Connect the male coupler of the head to the female coupler on the tool hose; ensure that 

the couplers are securely fitted.

 

Before connecting or disconnecting the head and the hose, ensure that the 

     ram of the head is fully retracted.

Summary of Contents for BTEPE2.DET10













Reviews: