Cembre B54D-D6, Operation And Maintenance Manual

Page: 5 / 8

11 4
2.5) Release of dies
(Ref. to Fig. 1)
Press the pressure release button (8), the ram will retract and open the jaws.
2.6) Battery status (Ref. to Fig. 2)
Inserting the battery into the tool or releasing the operating button causes the residual bat-
tery capacity to be automatically displayed for 5 seconds on the indicator.
The number of LEDs illuminated indicates the residual capacity.
6 LEDs illuminated: Fully charged
3 LEDs illuminated: 50 % capacity
1 LED illuminated: Minimum charge
2.7) Insertion/replacement of battery
To insert the battery, slide it into its seat until it locks
(Ref. to Fig. 3).
To replace an exhausted battery, press both lateral
red buttons simultaneously and slide it forward.
FIG. 3
FIG. 2
2.8)”W” style crimping dies assembles
– Press pins (2) and insert “W” dies into their seats
(Ref. to Fig. 4).
– To disassemble them simply press the pins and
slip them from the jaws.
I
T IS RECOMMENDED TO USE THE TOOL ONLY
WITH PRODUCT TO BE CRIMPED INSERTED
.
2
2
"W" style crimping dies
FIG. 4
TABLE 3 (ITEM 10 IN TABLE 2)
Code N° DESCRIPTION
6000625 11 RUBBER GRIP 1
6000233 100 ACTUATING MECHANICAL GROUP 1
6000357 100 1 HOUSING 1
6000358 100 4 GEAR 1
6760004 100 8 Ø 2X8 CYLINDRICAL PIN 3
6900008 100 9 M3x6 SCREW 2
6000849 100 10 Ø 3 SCHNORR WASHER 2
6740020 100 11 1/4" BALL 2
6000363 100 15 GEAR 3
6402009 100 16 BEARING 1
6402006 100 17 WASHER 1
6000328 100 18 WASHER 1
6760012 100 19 CYLINDRICAL PIN 2
6000315 100 20 SPACER 3
6000231 100 210 COMPLETE DISC 1
6000229 100 6 DISC 1
6000227 100 7 BALL SUPPORT 1
6700080 100 8 Ø 6 CIRCLIP 1
6650136 100 9 WASHER 1
6000232 100 220 COMPLETE CAM 1
6000595 100 250 COMPLETE MOTOR 1
6000254 300 COMPLETE HYDRAULIC GROUP 1
6620122 300 1 RAM 1
6040240 300 10 BACK-UP RING 1
6360300 300 11 O-RING 1
6000560 300 15 MEMBRANE RING 1
6720072 300 16 OIL RESERVOIR 1
6300027 300 17 VALVE PISTON 1
6000561 300 18 GRUB SCREW 1
6520232 300 19 VALVE SPRING 1
6620378 300 21 PUMPING RAM 1
6000563 300 24 VALVE ROD 1
6000575 300 26 SPRING SUPPORT 1
6000565 300 27 TEST PRESSURE CAP 1
6641027 300 30 WASHER 1
6000567 300 31 SETTING VALVE LOCKNUT 1
6000603 300 45 PRESSURE RELEASE LEVER 1
6000570 300 57 PUMPING RAM RETURN SPRING 1
6740100 300 62 5/32" BALL 1
6520160 300 63 SPRING 1
6340590 300 64 GRUB SCREW 1
6520200 300 65 SPRING 1
6740120 300 66 7/32" BALL 1
3041735 300 67 TIE 2
Qty Item