10
2.8) Using the battery charger
Carefully follow the instructions in the battery charger user manual.
3. MAINTENANCE
The tool is robust, completely sealed, and requires very little daily maintenance. Compliance with
the following points, should help to maintain its optimum performance:
3.1) Thorough cleaning
Dust, sand and dirt are a danger for any hydraulic device.
Every day, after use, the tool must be wiped with a clean cloth taking care to remove any residue,
especially close to pivots and moveable parts.
Do not use hydrocarbons to clean the rubber parts.
3.2) Storage case
When not in use, the tool should be stored and transported in the steel case, to prevent damage.
The case, type VAL FC470, is suitable for storing the tool and the accessories.
VAL FCL: Size
559x459x131 mm (22x18.1x5.2 inches)
, Weight 6,7 kg (14.7 lbs).
4. CONNECTION TO COMPUTER
The memory card integrated in the tool records operating data from 200.000 cycles for transfer via
the USB cable supplied.
To view and manage this data, go to
www.cembre.com
and register in the dedicated area, then
download the free
Cembre
software
CEM_SWBT01
.
Keeping the Firmware of the tool updated, via free of charge download from here, will optimise
the tool's performance.
5. RETURN TO
Cembre
FOR OVERHAUL
In the case of a breakdown, contact your local Agent who will advise you on the problem and give
you the necessary instructions on how to dispatch the tool to our nearest service Centre; if possible,
attach a copy of the
Cembre
Test Certifi cate supplied with the tool or, if no other references are
available, indicate the approximate purchase date and the tool serial number.
ENGLISH
Summary of Contents for B-FC470
Page 3: ...3 FIG BILD 4 FIG BILD 5 FIG BILD 3 max 53 5mm 1 2 3...
Page 31: ...31 379 14 9 83 3 3 346 13 6 FIG BILD 7 mm inch FIG BILD 8...
Page 32: ...32 NOTE...
Page 35: ...35...
