ENGLISH
Installation manual Ver. 05-2017
11
WARNING
the instructions in this chapter address the operator who must operate wearing the personal protection devices
indicated in chapter 2.
4.1 CLEANING
Before starting the machine, clean off any dust, foreign matter and soiling that may have accumulated during
transport. Use alcohol to clean the plastic parts.
WARNING
Do not use liquids containing solvents or blasts of compressed air to clean the wheel balancer.
4.2 AMBIENT CHARACTERISTICS
The operating environment must have the following characteristics:
▪
Temperature:
+ 5 to + 40°C (41 - 104°F)
▪
Maximum relative humidity
:
80%
The machine may not be used in open places and/or exposed to atmospheric agents or in environments with cor-
rosive and/or abrasive vapours, fumes or dust with the risk of fire or explosion, and in any case where the use of
explosion-proof components is prescribed. In addition, for machines equipped with SONAR (LA-EMS-LR), air currents
or forced ventilation in the direction of the device may cause malfunctions or incorrect readings.
WARNING
Should at the time of installation the ambient conditions be different from those prescribed, or if they have changed over time, do
not use the machine but immediately contact the manufacturer for the relative inspection.
4.3 END PIECES INSTALLATION/REMOVAL
Before fitting the end piece to the wheel balancer, thoroughly
clean the machine shaft and the adapter hole. Any traces
of dirt or incorrect locking may affect balancing accuracy.
The wheel balancer is supplied complete with adapter and
cones for fastening wheels with a central hole. The threaded
end must be fitted during machine installation using the Al-
len wrench provided applying the correct tightening torque
(20-25Nm). If it is a machine with pneumatic locking, follow
the procedure indicated in the next pages. In both cases, it
can be removed for fitting any optional adapters.
WARNING
Using non-original accessories might compromise the measuring quality.
Contact the manufacturer for the supply of special adapters or spare parts of any kind.
Installation
