Unit Normalization
9. Insert Normalization Standard into SMART Trac II
10. Press Ready
Note: Process will take about 1 hour.
11. SUS Temperature Stabilization will be shown on the screen.
12. Collecting data at gain 10, 25 and 50 will be shown on the screen.
12. Collecting data at gain 10, 25 and 50 will be shown on the screen.
13. When done, screen will go back to the SMART Trac menu.
After unit normalization, you can now begin developing/importing
method/s on the SMART Trac II.
Summary of Contents for Smart Trac II
