BRI Card Installation with Elastix 2.2.0
Step by Step Guide
4
If you can see all the spans detected by asterisk, which means your CB400P/CB400E card is ready to
make calls using these configured channels.
Configure via command line
1. Please run the following command to configure the /etc/dahdi/system.conf and
/etc/asterisk/dahdi-channels.conf file automatically.
[root@pbx1 ~]# dahdi_genconf
It does not show any output if dahdi_genconf runs successfully.
[root@pbx1 ~]# dahdi_cfg –vvvvvvv
You can get some information of all the channels as shown in screenshot, if
dahdi_cfg –vv command runs successfully.
