CEM DT-6505, Manual

Page: 3 / 29

2
Introduction
This meter measures AC/DC Voltage, AC/DC Current, Resistance,
Capacitance, Frequency (electrical & electronic), Duty Cycle, Diode
Test,Insulation Test, and Continuity plus Thermocouple Temperature. It
can store and recall data. It features a waterproof, rugged design for
heavy duty use. Proper use and care of this meter will provide many
years of reliable service.
Safety
This symbol adjacent to another symbol, terminal or o
perating device indicates that the operator must refer t
o an explanation in the Operating Instructions to avoid
personal injury or damage to the meter.
This WARNING symbol indicates a potentially hazard
ous situation, which if not avoided, could result in deat
h or serious injury.
This CAUTION symbol indicates a potentially hazardo
us situation, which if not avoided, may result damage t
o the product.
This symbol advises the user that the terminal(s) so m
arked must not be connected to a circuit point at whic
h the voltage with respect to earth ground exceeds (in
this case) 1000 VAC or VDC.
This symbol adjacent to one or more terminals identifi
es them as being associated with ranges that may, in
normal use, be subjected to particularly hazardous vol
tages. For maximum safety, the meter and its test lead
s should not be handled when these terminals are ene
rgized.
This symbol indicates that a device is protected throug
hout by double insulation or reinforced insulation.
PER IEC1010 OVERVOLTAGE INSTALLATION CATEGORY
WARNING
CAUTION
MAX
1000V