18
AUTORANGING/MANUAL RANGE SELECTION
When the meter is first turned on, it automatically goes into
AutoRanging. This automatically selects the best range for the
measurements being made and is generally the best mode for most
measurements. For measurement situations requiring that a range be
manually selected, perform the following:
1. Press the
RANGE
key. The “
AUTO”
display indicator will turn off.
2. Press the
RANGE
key to step through the available ranges until you
select the range you want.
3. To exit the Manual Ranging mode and return to Autoranging, press
and hold RANGE button.
MAX/MIN
1. Press the
MAX/MIN
key to activate the MAX/MIN recording mode.
The display icon "
MAX
" will appear. The meter auxiliary display will
display and hold the maximum reading and will update only when a
new “max” occurs.at the same time the minimum values are
calculated as well,press the
MAX/MIN
button to alternately display
the maximum or minimum values.
2.To exit MAX/MIN mode press
and hold
the
MAX/MIN
button about
two seconds.
RELATIVE MODE
The relative measurement feature allows you to make measurements
relative to a stored reference value. A reference voltage, current, etc.
can be stored and measurements made in comparison to that value.
The displayed value is the difference between the reference value and
the measured value.
Note:
Relative mode operate in the Rlow
function is zero.
1. Perform the measurement as described in the operating instructions.
2. Press the
REL
button to store the reading in the display and the
"
REL
" indicator will appear on the display.
3. the auxiliary display show REL TEST value and Main display show
the current value.
4. Press the
REL
button to exit the relative mode.
Summary of Contents for DT-6505
Page 1: ...User s Guide The Industrial Multimeter...
Page 2: ...1...
