13
Coating Thickness Tester User Manual
8. Delete Functions
In MENU system, you can find following function:
•
Delete current data:
in measurement interface, you can delete the
last data by pressing right button.
•
•
Delete all data:
Enter menu-view; you can delete all data and statistics
of the Current
•
•
Delete Group data:
Enter menu-view-group data; you can delete
this group data by pressing left button
•
Transfer data to PC or phone or other Bluetooth receiving device.
Enter Menu-setting, then turn on Bluetooth, measure data will be
sent automatically via Bluetooth, you can also read all stored measured
in all mode.
9. Trouble Shooting
The following list of error messages explains how to identify and
eliminate faults.
Err1: Fe probe fault
Err2: Non-Fe probe fault
Err3: Both probes.
Err4: Fe probe fault
Err5: Non-Fe probe fault
Warning:
Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority
to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one
or more of the following measures:
