True RMS Industrial Multimeter User's Guide
True RMS Industrial Multimeter User's Guide
True RMS Industrial Multimeter User's Guide
True RMS Industrial Multimeter User's Guide
22
Enclosure
Diode Test
Continuity Check
PEAK
Temperature Sensor
Input Impedance
AC Response
ACV Bandwidth
Crest Factor
Display
Overrange indication
Auto Power Off
Polarity
Measurement Rate
Low Battery Indication
Double molded, Waterproof (Ip67)
Test current of 0.9mA maximum,
open circuit voltage 2.8V DC typical
Audible signal will sound if the
resistance is less than 35Ω(approx.),
test current <0.35mA
Captures peaks >1ms
Requires type K thermocouple
>10MΩ VDC & >3MΩ VAC
True rms
40Hz to 1000Hz
<3 at full scale up to 500V,
decreasing linearly to<1.5 at 1000V
40,000 count backlit liquid crystal
display with bargraph
"OL" is displayed
15 minutes (approximately) with
disable feature
Automatic (no indication for positive);
Minus (-) sign for negative
8 times per second, nominal
"
" is displayed if battery voltage
drops below operating voltage
