17
10.2.8 Intercom-Audio Overlay Sensitivity (Default: 3)
The music, FM radio and GPS volume will be lowered to play in the
background if you talk over the intercom while the overlaid audio is
playing. You can adjust the intercom sensitivity to activate this background
audio mode. Level 1 has the lowest sensitivity and level 5 has the highest
sensitivity.
Note:
If your voice is not louder than the sensitivity of the selected level, the
overlaid audio will not be lowered.
10.2.9 Audio Overlay Volume Management (Default: Disable)
The music, FM radio and GPS overlaid audio reduces in volume whenever
there is an ongoing intercom conversation. If Audio Overlay Volume
Management is enabled, the volume level of the overlaid audio will not be
reduced during an intercom conversation.
10.2.10 HD Intercom (Default: Enable)
HD Intercom enhances the two-way intercom audio from normal quality to
HD quality. HD Intercom will become temporarily disabled when you enter
into a multi-way intercom. If this feature is disabled, the two-way intercom
audio will change to normal quality.
Note:
• The intercom distance of HD Intercom is relatively shorter than normal
intercom.
• HD Intercom will become disabled temporarily when Bluetooth
®
Intercom
Audio Multitasking is enabled.
10.2.11 HD Voice (Default: Enable)
HD Voice allows you to communicate in high-definition during phone calls.
This feature increases the quality so that the audio will be crisp and clear
during phone call conversations.
Three-Way Conference Phone Call with Intercom Participant will not be
available if HD Voice is enabled.
Note:
• Refer to the manufacturer of your Bluetooth
®
device that will be connected
to the headset to see if it supports HD Voice.
• HD Voice is active only when Bluetooth
®
Intercom Audio Multitasking is
disabled.
10.2.12 Smart Volume Control (Default: Disable)
Enabling Smart Volume Control automatically changes the level of the
speakers volume based on the level of the environment noise. You can
enable it by setting the sensitivity to low, medium or high.
10.2.13 Sidetone (Default: Disable)
Sidetone is audible feedback of your own voice. It helps you to naturally
speak at the correct level according to varying helmet noise conditions.
If this feature is enabled, you can hear what you are speaking during an
intercom conversation or a phone call.
10.2.14 Voice Prompt (Default: Enable)
You can disable voice prompts by software configuration settings, but the
following voice prompts are always on.
- Headset configuration settings menu, battery level indicator, speed dial,
FM radio functions.
10.2.15 RDS AF Setting (Default: Disable)
Radio Data System (RDS) Alternative Frequency (AF) Setting allows a
receiver to re-tune to the second frequency location when the first signal
becomes too weak. With RDS AF enabled on the receiver, a radio station
with more than one frequency can be used.
10.2.16 FM Station Guide (Default: Enable)
When FM Station Guide is enabled, FM station frequencies are given by
voice prompts as you select preset stations. When FM Station Guide is
disabled, the voice prompts on FM station frequencies will not be given as
you select preset stations.
10.2.17 Advanced Noise Control™ (Default: Enable)
When Advanced Noise Control is enabled, the background noise is reduced
during an intercom conversation. When it is disabled, the background noise
is mixed with your voice during intercom.
Summary of Contents for INTERPHONE U-COM 4
Page 1: ...User manual...
