13
To disconnect the mobile phone call during a conference phone call, press
and hold the Center Button for 2 seconds.
Note:
When you have an incoming intercom call during a mobile phone call,
you will hear high tone double beeps.
7.5 Group Intercom
Group Intercom is a command that allows you to instantly start a Multi-Way
Conference Intercom with three of the most recently paired headsets.
The first unit is the one which will activate the connection of all the
members of the group.
Connection will be established with same logic of normal 4 way conference.
A
B
C
D
1. Go through intercom pairing with up to three headsets you want to have
Group Intercom with.
2. Tap the MUSIC Button and PHONE Button together to begin Group
Intercom. The LED will flash green and you will hear a voice prompt,
“Group intercom”.
x 1
3. When all of the headsets are connected together, everyone will hear a
voice prompt, “Group intercom connected”.
4. To stop Group Intercom, press and hold the Center Button for 5 seconds
during Group Intercom. You will hear a voice prompt, “Group intercom
terminated”.
7.6 Old Interphone Series
It is possible to pair previous Interphone series devices by pressing, with the
unit on, the INTERCOM and TELEPHONE buttons for 5 seconds. Then start
pairing mode on the second unit, usually pressing the power button (with
the control unit off) until the led flashes red/blue.
x 3
10 sec
6 sec
?
5 sec
Bluetooth
Mesh
Interphone U-Com 16 (Utente)
Aggiungi utente
Aggiungi utente
Aggiungi utente
Fine intercom
Setup
Bluetooth
®
Intercom - other pairings
Other Interphone series pairing (to be done with unit OFF)
Anycom pairing for other brands (except Sena)
Anycom
pairing
Interphone
pairing
Intercom
pairing
Confi guration
menu
Mobile phone
pairing
7.7 Anycom
Anycom feature allows intercom conversations with other intercom brands.
It is possible to pair the intercom with only one non-Interphone device at a
time. The intercom distance depends on the performance of the connected
Bluetooth
®
intercom. When a not-Interphone device is paired with the
Interphone device, if another Bluetooth
®
device is paired via the second
mobile phone pairing, it will be disconnected.
x 3
10 sec
6 sec
?
5 sec
Bluetooth
Mesh
Interphone U-Com 16 (Utente)
Aggiungi utente
Aggiungi utente
Aggiungi utente
Fine intercom
Setup
Bluetooth
®
Intercom - other pairings
Other Interphone series pairing (to be done with unit OFF)
Anycom pairing for other brands (except Sena)
Anycom
pairing
Interphone
pairing
Intercom
pairing
Confi guration
menu
Mobile phone
pairing
1. With U-COM 4 on, enter the configuration menu by pressing the central
button for 10 seconds. Do not to release the button before the led turns
blue.
2. Press the PHONE button 3 times to activate the ANYCOM pairing mode.
3. Set the not-Interphone intercom to mode Phone pairing.
Summary of Contents for INTERPHONE U-COM 4
Page 1: ...User manual...
