background image

15

9. FUNCTION PRIORITY AND FIRMWARE 

UPGRADES

9.1 Function Priority

The headset prioritizes connected devices in the following order:
1. (Highest) Mobile phone

2. Voice command mode

3. Bluetooth

®

 Intercom 

4. Music sharing via Bluetooth

®

 stereo 

5. FM radio

6. Bluetooth

®

 stereo music

A lower-priority function gets interrupted by a higher-priority function. For 

example, stereo music will be interrupted by an Intercom Conversation; an 

Intercom Conversation will be interrupted by an incoming mobile phone call.

9.2 Firmware Upgrades

The headset supports firmware upgrades. Using the Device Manager utility 

(available for PC and MAC on 

www.interphone.com

) you can upgrade 

firmware.
The USB Power & Data Cable (USB-C) must be connected to your computer, 

then start Device Manager on computer and follow instructions step by step.
Interphone Unite APP can check the firmware version present on the 

headset and inform you in case of a newer available firmware, but APP can’t 

flash the new firmware to headset.

10. CONFIGURATION SETTING

10.1 Headset Configuration Setting

With U-COM 4 on, press and hold central button for 10 seconds, to enter 

settings menu. Don’t release the button until the led light is blue.

x 3

10 sec

6 sec

?

5 sec

Bluetooth

Mesh

Interphone U-Com 16 (Utente)

Aggiungi utente

Aggiungi utente

Aggiungi utente

Fine intercom

Setup

Bluetooth

®

 Intercom - other pairings

Other Interphone series pairing (to be done with unit OFF)

Anycom pairing for other brands (except Sena)

Anycom 

pairing

Interphone 

pairing

Intercom 

pairing

Confi guration 

menu

Mobile phone 

pairing

To navigate through the settings, press once the MUSIC button or the 

PHONE button.
1.  Phone pairing

2.  Second Mobile Phone Pairing

3.  Phone selective pairing (pair a device with HFP profile only)

4.  Media selective pairing (pair a device with the A2DP profile only)

5.  GPS pairing
To confirm the following configuration menu options, press the CENTER 

button once.
6.  Delete all pairings

7.  Anycom pairing

8.  Factory reset

9. Exit

10.1.1 Delete all pairings

Delete all Bluetooth

®

 pairings stored in the device.

Summary of Contents for INTERPHONE U-COM 4



















Reviews: