Cellular iCell User Manual Download Page 9

Notes 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

iCell Cardiomyocytes User’s Guide

 5 

 

Chapter 2.

 

Handling and Storage 

Handling iCell Cardiomyocytes 

iCell Cardiomyocytes are provided as cryopreserved single-cell suspensions in 
1.5 ml cryovials. Upon receipt, directly transfer the cryobox containing iCell 
Cardiomyocytes to the vapor phase of a liquid nitrogen storage dewar. CDI strongly 
recommends transferring the entire cryobox into the storage rack to avoid 
transferring individual vials. 

 

Handling iCell Cardiomyocytes Media 

iCell Cardiomyocytes Plating Medium and iCell Cardiomyocytes Maintenance 
Medium are shipped frozen on dry ice. Upon receipt, store iCell Cardiomyocytes 
media at -20°C until ready for use and at 4°C for up to 2 weeks after thaw. If media 
will be used for longer than 2 weeks, aliquot and freeze again after the initial thaw. 
Do not subject media to more than a single refreeze and thaw cycle. 

 

 

It is critical to maintain cryopreserved iCell Cardiomyocytes at a stable 
temperature. Minimize exposure of cryopreserved iCell Cardiomyocytes to 
ambient temperature when transferring vials to liquid nitrogen storage.  

Summary of Contents for iCell





















Reviews: