SKU#:
VS37W/2
Description:
Bluetooth Speaker
Editor:
Xue feng Sun
Approved by:
Henry Chen
Version:
1.0
Page:
8/8
3B02 & 3B03, No.5, Hsin-Yi Rd., Sec. 5, Taipei 11011, Taiwan, R. O. C. Tel: 886 2 27223333 Fax: 886 2 27225050
www.celltrend.com.tw
(a)Prior to pair your dongle with this speakerphone, please ensure the previous Bluetooth connection with other
device is removed.
(b)Whenever Bluetooth connection/link is removed, to resume connection, please repeat steps (b) – (e). For
example: Out of 10 meter sensing distance, speakerphone/PC is powered off and then turn on, or the dongle is
removed from PC and reconnected.
C2) Enjoy PC’s Music Streaming via Speakerphone
(a)Volume Adjustment:
When conversation is in process, press the volume buttons repeatedly until you reach the desired volume level
Important:
While adjusting volume, please do not press and hold the V+/V- too long as this might trigger other
functions.
(b)Music Play & Pause:
You may press the MFB to play or pause music streaming via the speakerphone.
(c)Music Stop:
Press the “STOP” button.
(d)Sound Track Selection :
Press and hold V+ or V- for sound track up & down.
D1) Pairing to an Audio Dongle
The following procedure describes configuration set up with an Audio Dongle of which password is “0000”. If you
are using other dongles of which password is multiple, please ensure “0000” is one of them. Please refer to its
instruction.
(a) Place the
speakerphone and dongle no more than 1 meter apart.
(b) Ensure the speakerphone is under off mode.
(c) Initiate the dongle’s pairing function. (To use your dongle, please refer to your dongle instruction manual.)
(d) Press and hold the MFB for 6 seconds approximately until the LED flashes red and blue alternately. It’s now
ready for pairing.
(e) The dongle will initiate pairing and link to the speakerphone. Once link is completed, the speakerphone will emit
a long beep with LED flash on blue every 15 seconds.
Important:
(1)Under the pairing mode, if the pairing cannot be completed within 2 minutes, the speakerphone LED
will first flash on red for 3 seconds with a long beep from speaker, then LED will flash off and speakerphone will be
powered off. Please repeat steps (c) to (e) to pair the speakerphone and dongle again.
(2)As the dongle will initiate pairing and link to Bluetooth devices of which password is “0000”, to fix pairing and
