SKU#:
VS37W/2
Description:
Bluetooth Speaker
Editor:
Xue feng Sun
Approved by:
Henry Chen
Version:
1.0
Page:
5/5
3B02 & 3B03, No.5, Hsin-Yi Rd., Sec. 5, Taipei 11011, Taiwan, R. O. C. Tel: 886 2 27223333 Fax: 886 2 27225050
www.celltrend.com.tw
(2)To un-mute: Under mute mode, press and hold the ‘STOP” button until you hear a beep from the speaker,
then release button.
Important:
The function is only accessible with those phones with Hands-Free Profile.
(g)Volume Adjustment:
When conversation is in process, press the volume buttons repeatedly until you reach the desired volume level.
Important:
While adjusting volume, please do not press and hold the V+/V- too long as this might trigger other
functions.
(h)Call Inter-Change:
When conversation is in process,
you may interchange the call between your handset and speakerphone.
(1)Speakerphone to Handset:
：
Press the “STOP” button twice.
(2)Handset to Speakerphone
：
Press either the “STOP” twice or “MFB” once. This could be varied because of
different phones.
For those phones with Headset profile only, you need to power off the speakerphone.
Important:
The function is only accessible with those phones with Hands-Free Profile.
(i)Music Play & Pause:
After completion of Bluetooth connection with an A2DP phone, the speakerphone is always under standby mode.
You may press the MFB to play or pause music streaming via the speakerphone. This could be varied because
of various phones .
(1)Press the MFB for music streaming or pause. For example: NKI 6300.
(2)If you’ve never had music streamed via speakerphone, you need to activate music streaming via speaker for
the first time, or else, it will trigger the voice dialing. . For example: SonyEricsson W610C.
Important:
For some of the phones, press to the MFB will only activate the voice dialing. For example: NKI
3250; MOTO A1200.
(j)Sound Track Selection :
Press and hold V+ or V- for sound track up & down.
(k)Music Stop:
Press the “STOP” button.
(l)Automatic Switching between Music Streaming & Calls:
When music streaming via the speakerphone is in process, if there’s an incoming call, it’ll switch to the call and
resume music streaming after completion of call.
B1) Pairing to a PC with USB Dongle (HCI V2.0)
The following procedure describes configuration set up with IVT “BlueSoleil” software. If you are using other
software, please refer to its instruction.
(a) Place the speakerphone and dongle no more than 1 meter apart.
