SKU#:
VS37W/2
Description:
Bluetooth Speaker
Editor:
Xue feng Sun
Approved by:
Henry Chen
Version:
1.0
Page:
3/3
3B02 & 3B03, No.5, Hsin-Yi Rd., Sec. 5, Taipei 11011, Taiwan, R. O. C. Tel: 886 2 27223333 Fax: 886 2 27225050
www.celltrend.com.tw
Turning On
: Speakerphone is under off mode:
(a) Switch on the power switch.
(b) Press and hold the MFB until the LED flashes on blue. Release the MFB. Mean while you may hear a beep
from the speaker.
(c) Speakerphone will be under standby mode.
Turning Off
: Speakerphone is not under off mode:
(a) Press and hold the MFB until you hear a beep from the speakerphone. Release the MFB. Mean while the
LED will first flash on red for 3 seconds, then flashes off. You may also turn off the power switch to power off
the speakerphone.
(b) Speaker will be off.
A1) Pairing to a Mobile Handset
Prior to using the speakerphone for the first time, you must pair it with a Bluetooth-enabled mobile handset. The
following steps describes pairing instruction for a typical Bluetooth-enabled mobile handset.
(a) Place the speakerphone and mobile handset no more than 1 meter apart.
(b) Ensure the speakerphone is under OFF mode.
(c) Press and hold the MFB until the LED flashes red and blue alternatively. Meanwhile, you may hear a long
beep. It’s now ready for pairing.
(d) Activate your mobile handset’s Bluetooth accessing function by referring to your mobile handset user guide for
details. Meanwhile, the handset will search for accessible Bluetooth devices.
(e) Select “BTS-S2B1X” from the list.
Enter the pre-programmed passkey “0000” and press “OK” to pair the speakerphone and the handset. When
pairing is completed, the LED will flash on blue for 1 second with a long beep from the speaker. Now the
speakerphone is under standby mode. (For most of the mobile handset models, a headset icon will be shown
on the screen.)
(f) Press “Return” to go back to your handset’s main menu. You should, now, be able to make and receive calls
through the speakerphone. Please place the mobile handset to the speakerphone no more than 10 meters.
(Obstruction could cause shorter sensing distance.)
Important:
Under the pairing mode, if the pairing cannot be completed within 2 minutes, the speakerphone LED
will first flash on red with a beep from speaker, then LED will flash off and speakerphone will be under off mode..
Please repeat steps (b) to (f) to pair the speakerphone and mobile handset again.
A2) Connection/Link to a Mobile Handset
After pairing is completed, speakerphone is always under standby mode. Before you place or answer a call, if the
