- 9 -
Install a Permaport Bracket by sliding over the inserts
Assemble the 14” long Stainless steel bolt as shown. Do not attach the plastic cap.
Insert a 14” long x ½” stainless steel bolt through the assembly and attach the ½” Brass
Lock nut and washer on the bottom.
Tighten the nuts using a ¾” wrench or Long Reach Socket, do not over tighten the nuts,
they need to be snug without causing undue compression of the Permaport. Finally, snap
the Plastic caps over the bolt heads onto the contoured washers.
There are two different types of rollers, on a front mount application the
position is unimportant. On a side mount application, it is important that
the straight rollers are in the rear position.
Washer
Lock Nut
Bolt
Raised Washer
Plastic cap
Washer
