- 8 -
A
tt
ac
hm
en
t
po
in
ts
f
or
Fr
on
t M
ou
nt
Rear Attachment
points for Side Mount
Front Attachment
point for Side Mount
Basic Assembly Applicable to all Applications
It is recommended that the basic mounting kit be applied to the Permaport away from the
water to avoid the possibility of loss of components
It is essential that all threads are coated with an anti seize compound prior to assembly,
failure to do so will complicate any future disassembly that may be required and will
invalidate the warranty.
There are large holes placed along the edges. Select the holes to be used, for front mount
use the two on the front edge, for side mount select two holes on the side edge, the front
point and one of the rear points, it is preferable to use the rear most position if possible.
The Permaport Xpress is supplied in a front mount
configuration, there are void fillers in the side holes. To
use for a side mount remove the void fillers from the holes
to be used for mounting and re-position then in the front
holes. To remove the fillers, use a screwdriver to pop off
the black caps and remove the bolt using a 9/16” socket
and a 9/16” wrench. Replace them in the front positions
using the same assembly as used in the side holes.
Place a shock absorbing insert in both the top and bottom rectangular
recesses on the selected holes
As Supplied
