CellarPro 4000Shwc, Owner'S Manual

Page: 35 / 43

35
V10.19
Remote Control / Display Instructions
Digital Display The temperature is displayed on the control in red.
Press “Power On/Off” to turn on and off.
When the “Compressor On” indicator light is on, the Compressor is
running.
When the “Fan On” indicator light is on, the Fan is running.
The cooling system is programmed with a Startup Delay to protect its
internal components. Upon installation, we provide instructions for the
installer to change the delay to 30 minutes.
Quick Chill
Button
Button
Icon
To activate the “Quick Chill” mode, press the “Up” button for 3 seconds
To deactivate “Quick Chill”, press the “Up” button for three seconds
again
The “Quick Chill” indicator (Row 3) light will turn on when the cooling unit
is in “Quick Chill” mode,
In the “Quick Chill” mode, the cooling unit will run continuously for 6 hours
(or until the unit reaches set point.). This mode is useful after loading
“warm” bottles in the cabinet.
Auto Defrost
Mode The cooling unit has a factory default defrost cycle that initiates every
16 hours for 20 minutes. When the cooling unit is in auto-defrost mode,
the “Defrost” Indicator light (Top row) will turn on, and the evaporator
fan will run.
Manual Defrost Hold the defrost button in for 3 seconds to initiate a manual defrost. The
“Defrost” Indicator light (Top row) will turn on for a 20 minute defrost
cycle.
Light The light button function is disabled, however pressing it will turn on/off
the light indicator on the display (2nd row).
Energy Saver The remote display is not configured with an Energy Saver mode. The
set point can be raised manually for periods where energy savings is
desired.