CellarPro 3000Scm, Owner'S Manual

Page: 44 / 53

44
V3.3.16
Switch Instructions
1. Fan Speed Selector Switch (Low/High)
The cooling unit fans operate on 2 speed settings: Low and High. For optimum sound
and energy efficiency, select the lowest fan speed that will maintain the desired cellar
temperature. High speed is recommended for initial cellar pull down and
extreme
temperature conditions.
2. Bottle Probe Jack (Bottle Probe)
Plug in the remote bottle probe (sold separately) to control the cellar by liquid
temperature rather than air temperature inside the cellar. Disconnecting the probe will
automatically return the control to air temperature. When using a bottle probe in liquid,
the
Temperature Differential will need to be adjusted to 1 as shown in the “Advanced
Operation” instructions below.
The probe jack is located inside the evaporator near the main power connection
terminal. On dual evaporator 6000Scm and 8000Scm systems, the bottle probe is
plugged into the Primary Evaporator only. Route the bottle probe lead wire out of the
appropriate location as indicated on the Knockout Detail drawing.