HGPTS
23
www.HGPTS.com
If possible, always utilize a drop cloth during erection and striking to avoid
possible pin holes. Raise tent uniformly to prevent any possible twisting
and turning of the frame otherwise damage may result. Clear the ground
of sharp objects before laying the floor to avoid possible damage. Remove
any items from the interior of the tent before striking. During striking
avoid setting the tent frame on top of tent top fabric. When storing for long
periods of time, dry the tent top to prevent mildew. Steer clear of catching
any fabric on corners and edges that could result in tearing.
SAFETY
All components meet ASTM-D 6413-99 – Standard Test Method for Flame
Resistance of Textiles (Vertical Test). All Vinyl is non-toxic.
Prior to installation the user should examine the installation site to determine
the proper securing and anchoring methods. Guy lines and frame must be
staked properly on all four corners based on current and future weather
conditions to prevent movement in high winds and possible personal injury
or physical damage. The tent should also be staked properly if left unmoni
-
tored for any length of time or if it is going to remain erect for longer than
several days. A minimum of two rows of sandbags are required (sandbags
not included). The complete tent is heavy. One person should be placed at
each corner, at a minimum, when moving or positioning tent.
Safety Features:
w
Fungus and Mildew Resistant
w
Flame Retardant
w
Ultra Violet Resistant
REPLACEMENT PARTS
Tie Ties – HT260
Tent Top Straps – HT131
X-Bracing Straps – HT531
5/8” x 24” (1.5875 cm x 60.96 cm) Hook Stakes – HT560
¼” (0.635 cm) Black Rope – 10079
Side Release Buckles (Male & Female) – HT935
Roof Vent – HT108
Floor – HT305
Tent Bag – HT790
ACCESSORIES
Field Repair Kit– ACVRKHT
CARE
