Erecting Procedure
11
www.HGPTS.com
14. Layout the floor underneath the frame.
15. Attach the floor by snapping the spring snaps to the inside 3/4” hole on
each base plate at each corner. Connect the spring snap to the inside slot for
remaining poles locations. Connect the hook and loop around the legs and
kick the legs out until the floor is tight.
13. Locate the remaining tent top straps, 120” (300 cm) in length, and attach.
Attach the loop end through the 1½” (3.81 cm) welded D ring, run the rest
of the strap through the loop and outside slot of the base plate, and pull tight.
