Celestron Celestar 8 Instruction Manual Download Page 68 | Manualshive

Page: 68 / 81

background image

68

Accessory Name - Part Number - Description

Compatible with

Celestar

Celestar Deluxe

produces images through your Celestar that match what you see with the unaided eye. This accessory uses
an Amici prism arrangement that, corrects the image. The model #94112-A allows you to look into the
telescope at a 45° angle, a desirable arrangement for terrestrial viewing. If you desire to view at a 90º angle,
then model #94108 is available.

Eyepiece Filters - To enhance your visual observations of planetary objects, Celestron offers a wide range
of colored filters that thread into the 1-1/4" oculars. Available are: #12 Deep Yellow, #21 Orange, #25 Red,
#58 Green, #80A Light Blue, #96 Neutral Density (25% T and 13% T) and Polarizing filters. Filters are
also available in sets of four.

X

X

Eyepieces - Like telescopes, eyepieces come in a variety of designs. And, with the advent of different
eyepieces, Celestron also has a variety of designs each with its own advantages and disadvantages. For the
1-1 /4" barrel diameter there are four different eyepiece designs available.

•

SMA - The SMA design is an improved version of the Kellner eyepiece. SMA’s are very good,
economical, general purpose eyepieces. Available in the focal lengths 6mm, 10mm, 12mm, and 25mm
(standard with the Celestar 8).

•

Plössl - Plössl eyepieces have a 4-element lens designed for low-to-high power observing. The Plössl’s
offer razor sharp views across the entire field, even at the edges! In the 1-1/4" barrel diameter, they are
available in the following focal lengths: 6.3mm, 7.5mm, 10mm, 12.5mm, 17mm, 20mm, 26mm,
32mm, and 40mm.

•

Ultima - Ultima is not really a design, but a trade name for our 5-element, wide field eyepieces. In the
1-1/4" barrel diameter, they are available in the following focal lengths: 5mm, 7.5mm, 12.5mm, 18mm,
24mm, 30mm, 35mm, and 42mm. These eyepieces are all parfocal. The 35mm Ultima gives the
widest possible field of view with a 1-1/4" diagonal and is ideal for the C8 with or without the
Reducer/Corrector.

•

Lanthanum Eyepieces (LV Series) - Lanthanum is a unique rare earth glass used in one of the field
lenses of this new eyepiece. The Lanthanum glass reduces aberrations to a minimum. All are fully
multicoated and have an astounding 20mm of eye relief-perfect for eyeglass wearers! The are available
in the 1-

1

/

4

” barrel diameter in the following focal lengths: 2.5mm, 4mm, 5mm, 6mm, 9mm, 10mm,

12mm, 15mm. Also available is an LV Zoom Eyepiece with the focal length range of 8 to 24mm.

X

X

«
...
66
67
68
69
70
...
»

Summary of Contents for Celestar 8


















































































Reviews:

No comments

Related manuals for Celestar 8

Brand: Orion Pages: 8

Brand: Clarke Pages: 8

Brand: Discovery Telecom Pages: 13

Odyssey Wireless LED

Brand: SurgiTel Pages: 2

Brand: SurgiTel Pages: 2

Brand: SurgiTel Pages: 2

Brand: SurgiTel Pages: 2

Brand: SurgiTel Pages: 2

Brand: Bresser Junior Pages: 14

Brand: Bresser Junior Pages: 20

SpecterOS4x Optical Sight

Brand: ARMAMENT Pages: 16

Brand: ASA Electronics Pages: 68

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands