Celestica A2210, User Manual, Page: 42 / 76

U S E R ’ S M A N U A L
2. Once the cage is removed, take out the PCI-X cards by removing the
screw holding each card in place as shown in Figure 19.
Figure 20 - Removing a PCI-X Card
3.
Install the new PCI-X card.
Replacing the PCI-X Cage
Adhere to the following cautions when replacing the PCI-X cage.
Caution
•
Ensure that the hole on the front of the PCI-X cage lines up with the peg
sticking out of the chassis.
•
Ensure that the flanges in the rear of the PCI-X cage go between the sheet
metal encasing them in the rear panel of the chassis.
•
Ensure that the PCI-X cage does not accidentally eject the H0 DDR VRM.
To replace the PCI-X cage, press the cage into the chassis such that the connectors
in the PCI riser card go into the appropriate socket.
6-8