Ceiva CEIVAshare SHR508A, User Manual

Page: 27 / 132

4. View ‐ Navigating your frame ‐ Frame Buttons ‐ White button (Picture)
The White button (Picture) on the back of the frame
By pressing the White button (Picture) during the slideshow, you can change the frame
from Slideshow Mode to Single Photo Mode , keeping it on a single photo.
After pressing the White button once, an Info Bar will appear at the bottom of the
screen, showing a thumbnail of the photo and who sent it to you.
The CEIVAshare frame will stay in Single Photo Mode depending on the Autostart
setting, or until you touch the Up or Down button.
With your required PicturePlan membership you can also view new photos right away
(rather than wait until the next day). Press the White button until the message “Let go
now to start the slideshow, or keep holding to connect” appears. If you let go of the
White button at this point, the slideshow will start again.
If you keep pressing the White button, then “You can let go now, I’m connecting”
appears on the screen, after which there's a status screen ‐‐ a bar across the bottom
that shows the progress of the connection.
After your frame disconnects from the CEIVA Network, your slideshow will start again.