2 About safety
✔
Animal
The operator is responsible for protecting the animal against unnecessary exposure.
✔
Devices for viewing emissions
The x-ray emission status is identified by:
1. A signal on the workstation screen such as the one reported below. It appears on video just after
the START command has been selected via keyboard or mouse (see Chapter 6 “Scanning“). It is
displayed all along the scan process.
2. Light indicators (LEDs) inside the control panels. They can be found on the sides of the scanner
gantry. They light on just after the START command has been sent via keyboard or mouse (see
Chapter 6 “Scanning“). They stay on all along the scan process or emission.
WARNING:
If the x-ray emission signals are on when the specific command
has not been selected or if they are off after a START emission
command or if the x-ray emission does not stop after the
expected time, IMMEDIATELY TURN THE DEVICE OFF and
2-4
Veterinary Application
Summary of Contents for NewTom 5G Vet
