ISSUE 4.0
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
4
1.0 INTRODUCTION
The practices in this manual provide installation and maintenance information for
the CEECO Model WPP-333-D or Model SSP-313-D Telephone, equipped with
ADI2.01 firmware.
The information in this manual is subject to change without notification.
For information not included in this manual, please call or write:
CEECO
Customer Service
519 W South Park Street
Okeechobee, FL 34972
863-357-0798- telephone
863-357-0006- facsimile
www.ceeco.net
2.0 GENERAL
2.1
The CEECO Model WPP-333-D or Model SSP-313-D Telephone is
designed for automatic dialing applications. The SSP-313-D is assembled
on a sturdy and attractive stainless steel panel. The WPP-333-D is
essentially the SSP-313-D housed in a sturdy, cast aluminum,
weatherproof housing.
2.2
The telephone utilizes a microprocessor-based design to deter fraud from
hand held tone dialers and hookswitch dialing. The microprocessor keeps
the transmitter muted (off) during periods of dial tone. Attempts to dial a
number by “flashing” the hookswitch will cause the microprocessor to
"reset" and open the line. It will then seize the line and dial any
programmed number(s).
2.2
When the handset is lifted one or two separate telephone numbers
(depending on user programming) of up to twenty-five (25) digits may be
automatically dialed.
2.3
Programming is accomplished via an internally mounted DTMF keypad.