Cedrat Technologies CCBu40, Product And Warranty Information

Page: 16 / 32

16 / 32
CCBU40 COMPACT CONTROLLER BOARD - PRODUCT AND WARRANTY INFORMATION Version 1.21
VIII.1. INTERFACE WITH THE CLIENT / SUPERVISOR
For the interface of the CCBu40 with the client supervisor, the connector is a micro D-Sub25.
Figure 4 : Supervisor interface
Pin N° Signal Description Comment
1 SY Analog sensor output for Y axis ±10V output.
2 SX Analog sensor output for X axis ±10V output.
3 AIX Analog order input for X axis ±10V input.
4 AIY Analog order input for Y axis ±10V input.
5 T°C Mechanism analogue temperature output 0-3.3V output. Only valid if PT1000 is used on the
mechanism.
6 Enable Digital enable input 0-3.3V input. Referenced to GND
7 Fault Digital fault output 0-3.3V output. Referenced to GND
8, 20 NC
9 RTS- Negative Request To Send RS422 signal
10 RTS+ Positive Request To Send RS422 signal
11 RX- Negative Receive RS422 signal
12 RX+ Positive Receive RS422 signal
13, 14, 15, 16,
17, 18, 19, 21
GND Ground
22 TX+ Positive Transmit RS422 signal
23 TX- Negative Transmit RS422 signal
24 CTS+ Positive Clear To Send RS422 signal
25 CTS- Negative Clear To Send RS422 signal