Operating elements
Machine overview
CEDIMA • Technical Documentation • CF • 4030 Joint Cutter • 194030001 – xx4030xx • Issue Date 17.03.2022
52
Legend (cont.)
No.
Designation
Type
Position
Function
8
Precision control valve
Speed
Speed
controller
clockwise
(right)
Speed in direction of
travel is increased. Here
you can carry out fine
adjustment of the travel
speed for cutting.
Counter-
clockwise
(to the left)
Speed in direction of travel
is decreased. Here you can
carry out fine adjustment
of the travel speed for
cutting.
9
Tare cutting depth
Pushbutton
press
Set the current position
of the cutting shaft as the
zero position.
This button must be
pressed before the cut,
when the diamond saw
blade “scratches” the
medium to be cut.
4.3.2
Safety devices
4.3.2.1
Engine fuse
The Engine fuse is located behind the left side cladding, above and behind the 12 V battery
Engine fuse
Legend
No.
Fuse circuit
Fusing
Colour
1
Ignition
10 A
Red
2
Not assigned
3
Not assigned
