PAGE 5
AUDIO CONNECTIONS
The Series X+ offers two audio connection standards, and passes its signal to
both outputs irrespective of the input used. The standards are:
Q
Digital
SPDIF
format audio data
SPDIF
is used by domestic and semi-professional digital audio devices.
You should connect the
SPDIF
output from your source to the
SPDIF
input of
the Series X+ using a single cable terminated with an
RCA
(or ‘phono’) plug.
The
SPDIF
output of the Series X+ should be connected to the
SPDIF
input of
a recording device or external
DAC
.
Q
Digital
AES/EBU
format audio data
The
AES/EBU
format is used by professional digital audio devices.
You should connect the
AES/EBU
output from your source to the
AES/EBU
input of the Series X+ using a single cable terminated with an
XLR
plug.
The
AES/EBU
output of the Series X+ should be connected to the
AES/EBU
input of a recording device or external
DAC
.
Channel status
No Series X+ processes are affected by channel status data. All units will echo
any such data directly to the outputs.
AES/EBU
SPDIF
IN
OUT
AES/EBU
IN
OUT
Summary of Contents for AZX+
