B:
On the inside of (019) Door Bottom Half Panel attach Catch Plate mid way up the panel and flush to the
outside of the panel edge using 2 (S18) #6 x 1” Wood Screws. (fig.1.2 and 1.3)
C:
On the inside of (019) Door Bottom Half Panel above the Catch Plate and centred on the end board attach 1
Door Handle using 2 (S13) #6 x 5/8” Pan Screws. (fig. 1.2 and 1.3)
D:
On the outside of (019) Door Bottom Half Panel attach the second Door Handle at approximately the same
place as the one on the inside. Use 2 (S13) #6 x 5/8” Pan Screws. (fig.1.4)
E:
Attach 2 Door Hinges on the outside of the (019) Door Bottom Half Panel on the opposite side from the Door
Handle. Judge spacing based on fig. 1.4. Use 3 (S13) # 6 x 5/8” Pan Screws per Hinge. (fig. 1.5)
Note:
Hinge stops must be tight to (019) Door Bottom Half Panel. (fig. 1.5)
Other Parts
Hardware
Step 1: Half Door Panel Assembly
Part 2
Outside view
019
Flush
S13
Door Handle
Hinge
Fig. 1.2
019
S13
S13
S18
019
Door Handle
Inside view
Fig. 1.3
Fig. 1.5
Fig. 1.4
019
10 x
#6 x 5/8” Pan Screw
2 x
#6 x 1” Wood Screw
S13
S18
2 x Door Handle
2 x Hinge
1 x Catch Plate
Catch Plate
S13
23
