manualshive.com logo in svg

Cedar Summit STORYBROOKE PLAYHOUSE P280070, Installation And Operating Instructions Manual

Share
Download
Cedar Summit STORYBROOKE PLAYHOUSE P280070 Installation And Operating Instructions Manual Download Page 13

1-877-817-5682

[email protected]

B.

 

 If there are any missing or damaged pieces or you need assistance with 

assembly please contact the consumer relations department directly.  Call us 

before going back to the store.

STOP

STOP

STOP

STOP

Key Number:

 The first two digits represent the step 

number. The third digit represents the piece. Note 

that if the part is used in multiple steps then the 

number only reflects the first step it is used in.

Quantity

Key Number

Part Description, 

Part Size

1X  131  Cafe Top FSC 15.9 x 127 x 1225.6 mm

Step 1: Inventory Parts - Read This Before Starting Assembly

C.

   

Read the assembly manual completely, paying special attention to ANSI warnings; 

notes; and safety/maintenance information.

D.

   

Before you discard your cartons fill out the form below.

 

•  The carton I.D. stamp is located on the end of each carton.

 

 •  Please retain this information for future reference.  You will need this information if you 

contact the Consumer Relations Department.

• Please refer to Page 3 for proper hardware assembly.  

 

•  Each step indicates which bolts and/or screws you will need for assembly, as well as 

any flat washers, lock washers, t-nuts or lock nuts.

A.

 

 This is the time for you to inventory all your hardware, wood and accessories, 

referencing the parts identification sheets.  This will assist you with your assembly.

 

•  The wood pieces will have the key number stamped on the ends of the boards.  

Organize the wood pieces by step, as per the key numbering system below.  

CARTON I.D. STAMP: __  __  __  __  __ 14459 ___ (Box 1)

MODEL NUMBER: 

P280070

 

13 

[email protected]   

Summary of Contents for STORYBROOKE PLAYHOUSE P280070













































Reviews:

No comments

Brands by name

Popular brands

Load more brands