Instructional video: http://www.cedarsummitplay.com/install-stoneycreek
26
C:
In the notched out opening of (061) Door Latch Block attach
the Magnetic Catch using 2 (S38) #7 x 1-1/8” Pan Screws. (fig.
6.3 and 6.4)
Important: Use a hand held screw driver and
DO NOT over tighten.
D:
From inside the assembly centre (061) Door Latch Block
on Catch Plate so the Magnetic Catch and the Catch Plate can
connect then attach to Door Wall with 2 (S15) #8 x 1-3/4” Wood
Screws. (fig. 6.3 and 6.4)
Note: Install 2 AAA/LR03 batteries in Doorbell prior to
attaching to assembly.
E:
From inside the assembly insert Doorbell 2 into the hole in
the Door Wall and attach with 2 (S38) #7 x 1-1/8” Pan Screws.
(fig. 6.3 and 6.4)
F:
On the outside of the assembly place Doorbell Trim over the
hole in the Door Wall so when you press it the doorbell rings
then attach with 2 (S37) #7 x 5/8” Pan Screws as shown in fig.
6.5.
G:
Above the Door Bell attach 1 Clicker Phone (with holder)
using 2 (S37) #7 x 5/8” Pan Screws. (fig. 6.3 and 6.4)
Inside View
Fig. 6.5
Magnetic Catch
Fig. 6.3
Catch
Plate
1 x
Door Latch Block 15/16 x 2-1/2 x 5”
Hardware
Wood Parts
061
Other Parts
1 x Magnetic Catch
1 x Door Bell 2 Set
1 x Clicker Phone
4 x
#7 x 1-1/8” Pan Screw
4 x
#7 x 5/8” Pan Screw
2 x
#8 x 1-3/4” Wood Screw
S15
S38
061
Step 6: Attach Door Panel Accessories
Part 2
Doorbell 2
Doorbell
Trim
S38
S37
Clicker Phone
and holder
Door Wall
Outside View
Door Wall
S15
S38
Inside View
Fig. 6.4
S37
S38
Note:
Use only AAA/LR03 batteries (not included)
Do not mix old and new batteries
Do not mix alkaline, standard (carbonized)
or rechargeable (nickel-cadmium batteries)
S37
